Payload per astrofisica delle
alte energie - Studio di Fattibilit? Definitivo
Pareschi, G. , Malaguti, G. (coord.)
2005, Contratto ASI: N.I/014/04/0 - Commessa: N. P150102 -
OAB/INAF team-study coordinato e finanziato da ASI
Payload per astrofisica delle alte energie - Sviluppo fasi
successive del progetto e stima preliminare dei costi
Pareschi, G. , Malaguti, G. (coord.)
2005, Contratto ASI: N. I/014/04/0 - Commessa: N. P150102 -
OAB/INAF team-study coordinato e finanziato da ASI
Performance predictions for the BEaTriX expanded beam
Spiga, D. , Salmaso, B. , Sironi, G. , Ghigo, M. , Cotroneo, V. , Vecchi, G.
2022, INAF/OAB technical report 03/2022
Performance simulations of a magnetic diverter for the
ATHENA (form. IXO) X-ray telescope
Spiga, D.
2014, INAF/OAB internal report 07/2014
Performed tests of the BEaTriX CCD#2
Sisana, D. , Salmaso, B. , Basso, S. , Ghigo, M. , Spiga, D. , Uslenghi, M.
2023, INAF/OAB internal report 04/2023
Phase A study and Proposal for Phases BCDEF of the XIAO
Mission of Opportunity
Mereghetti, S., DeLuca, A., Fiorini, M., LaPalombara, N., Tiengo, A., Uslenghi, M., Vianello, G., Zambra, A., Campana, S. , Moretti, A. , Basso, S. , et al.
Mereghetti, S., DeLuca, A., Fiorini, M., LaPalombara, N., Tiengo, A., Uslenghi, M., Vianello, G., Zambra, A., Campana, S. , Moretti, A. , Basso, S. , Conconi, P., Cotronoeo, V., Covino, S. , Ghirlanda, G. , Ghisellini, G. , Pareschi, G. , Tagliaferri, G. , Trifoglio, M., Amati, L., Gianotti, F., Stella, L., Antonelli, A., Guetta, D., Barbera, M., Collura, M.
2008, XIAO-XST-RE-003 (2008)
PLATO - FEM Analysis of L3 gluing
Basso, S.
2017, INAF/OAB technical report 11/2017
PLATO TOU: Steady-state thermal analyses
Basso, S.
2009, IR 04/2009
Preliminary design for XTP LFA mirror module
based on nickel
Procedura di superpulitura dei mandrini per ottiche radenti
in raggi X
Basso, S.
2005, INAF/OAB Internal Report 05/2005
Produzione di ottiche in SiC con processo "Plasma
Enhanced Chemical Vapour Deposition"
Pareschi, G. , Ghigo, M. , DeCaprio, V., Millul, R. , Taglioni, G.
2006, Report Avanzamento Progetto INAF/UIT/PRISMA/SiC,
Ottobre 2006
Produzione di ottiche in SiC con processo "Plasma Enhanced
Chemical Vapour Deposition"
Ghigo, M. , Pareschi, G.
2006, Allegato Tecnico e Gestionale, (2006)
Profile and roughness metrology of slumped glasses for the
"IXO back-up optics" project
Spiga, D. , Proserpio, L. , Salmaso, B. , Ghigo, M. , Friedrich, P., Vongehr, M., Winter, A., Basso, S. , Civitani, M. , Gallieni, D., Tintori, M., et al.
Spiga, D. , Proserpio, L. , Salmaso, B. , Ghigo, M. , Friedrich, P., Vongehr, M., Winter, A., Basso, S. , Civitani, M. , Gallieni, D., Tintori, M., Sironi, G. , Pagano, G., Negri, R., Rossi, M., Alpini, A., Cavenaghi, T., Zambra, A., Ferrario, I., Pareschi, G. , Citterio, O. , Tagliaferri, G.
2013, INAF/OAB internal report 15/2013
Proof of Concept No. 2 optic with slumped glasses: tests in
focus at PANTER
Spiga, D. , Civitani, M. , Burwitz, V., Burkert, W., Menz, B., Hartner, G., Salmaso, B. , Basso, S. , Pareschi, G. , Tagliaferri, G. , Ghigo, M. , et al.
2014, INAF/OAB internal report 03/2014
Proof of concept (POC2) realization: Slumped glass characterization with CUP
Civitani, M. , Basso, S. Spiga , D.
2013, INAF/OAB internal report 09/2013
Prototype realization of WFXT shell in glass: evaluation of the pendulum tool.
Civitani, M.
2013, INAF/OAB internal report 04/2013
Prototype realization of WFXT shell in glass:
Shell#4 grinding and polishing @LT-Ultra
Civitani, M.M. , Citterio, O.
2014, INAF/OAB internal report 12/2014
Prototype realization of WFXT shell in glass: Shell#4 integration in SSS
Civitani, M. , Mattaini, E.
2013, INAF/OAB internal report 08/2013
Prototype realization of WFXT shell in glass: Shell#8 development
Civitani, M. , Mattaini, E.
2013, INAF/OAB internal report 06/2013
Prototype realization of WFXT shell in glass: Shell#8 Fine Grinding
Civitani, M. , Mattaini, E.
2013, INAF/OAB internal report 07/2013
Prototype realization of WFXT shell in glass:
The new air bearing pitch tool.
Civitani, M. , Mattaini, E., Citterio, O. , Basso, S. , Holyszko, J.
2016, INAF/OAB internal report 11/2016
Prototype realization of WFXT shell in glass: the new symmetric oscillating pitch
tool
Civitani, M. , Mattaini, E.
2013, INAF/OAB internal report 05/2013
PSF defocusing simulation in the XIPE X-ray telescope Gas Pixel
Detector
Spiga, D. , Tagliaferri, G. , Soffitta, P., Muleri, F.
2016, INAF/OAB internal report 10/2016 - ESA class. XIPE-OAB-TN-0005
Pt/C multilayer stack for the scientific phase B of the NHXM
mission
Cangemi, F., Rodriguez, J., Belloni, T., Clavel, M., Grinberg, V.
2019, The Astronomer's Telegram, No. 12457
Reflectivity and stress characterization of W/Si and Pt/C
multilayer samples for the New Hard X-ray Mission phase B
development
Spiga, D. , Raimondi, L., Salmaso, B. , Negri, R.
2010, INAF/OAB internal report 03/2010
"Relazione del Consiglio dell' Unita' Organizzativa
Programmazione ai Direttori dei Dipartimenti Scientifici
dell'INAF al fine della preparazione del Piano
Triennale 2007 - 2009"
Zamorani, G., Comastri, A., Fontana, A., Maraschi, L., Orsini, S., Pallavicini, R., Pareschi, G. , Tosi, M., Vettolani, P.
2006, Unita' Organizzativa Programmazione di INAF,
Dicembre 2006
Relazione del Gruppo di Lavoro "Astrofisica al TeV", 20
Settembre 2006 SIMBOL-X: Pre-Phase A Study for a Formation
Flight mission in the Hard X-ray Energy Band
Pareschi, G. , Salvati, M., Scaramella, R., Tavani, M.
2006, INAF - Dipartimento 2, September 2006
Results of tests performed at PANTER and INAF/OAB on the
X-ray optic 349 manufactured at MSFC and Harvard-CfA
Spiga, D. , Canestrari, R., Pareschi, G. , Basso, S. , Bruni, R., Budau, B., Burkert, W., Colombo, D., Destefanis, G., Freyberg, M., Gorenstein, P., et al.
Spiga, D. , Canestrari, R., Pareschi, G. , Basso, S. , Bruni, R., Budau, B., Burkert, W., Colombo, D., Destefanis, G., Freyberg, M., Gorenstein, P., Gubarev, M., Hartner, G., Mazzoleni, F., Ramsey, B., Romaine, S., Valtolina, R.
2007, INAF-OAB technical report 02/07
Roughness characterization of an SPO sample with AFM:
optical side and non-optical side in the inter-rib region
Salmaso, B. , Spiga, D.
2017, INAF/OAB technical report 08/2017
Roughness measurements on the BEaTriX parabolic mirror during
the pitch polishing process
Salmaso, B. , Cotroneo, V. , Vecchi, G. , Basso, S. , Spiga, D.
2020, INAF/OAB internal report 03/2020
Scattering simulation for the eXTP mirror module by nickel replica without gold
Spiga, D.
2020, INAF/OAB internal report 2020/02
Scientific Requirements for the XIAO telescope
Mereghetti, S., Amati, L., Campana, S. , De Luca, A., Ghirlanda, G. , Ghisellini, G. , Moretti, A. , Stella, L., Tiengo, A., Vianello, G.
2008, XIAO Phase A Documents, XIAO Phase A, XIAO-XST-SR-003
SGO Optics collaboration with MPE: The Joint Integrated Module #1 (JIM#1)
Civitani, M.M. , Basso, S. , Crimi, G., Proserpio, L. , Winter, A.
2015, INAF/OAB internal report 11/2015
Shell dimensioning for the HXMT telescope
Cotroneo, V. , Pareschi, G. , Tagliaferri, G.
2006, INAF/OAB: HXMT-OAB-ID-001,
27/11/2006
Silicon mirrors for the XEUS X-ray telescope pore optics:
microroughness characterization
Spiga, D. , Sironi, G. , Cotroneo, V. , Canestrari, R., Destefanis, G.
2008, INAF/OAB Technical report 01/2008
Silicon Pore Optics (SPO):
Preliminary performance model for plate production support
Civitani, M. , Spiga, D.
2016, INAF/OAB internal report 03/2016
SIMBOL-X: replica simulation on Alluminum samples with
Nickel coating
Sironi, G. , Spiga, D. , Pareschi, G.
2007, INAF/OAB technical report 05/07
Simbol-X telescope:
passive shielding systems scientific trade-off studies
Malaguti, G, Fioretti, V., Mereghetti, S, Pareschi, G.
2006, INAF-IASFBO-SX-TN-0001v. 4.0 - Dec 6, 2006
Simulation of a Silicon Pore Optic mirror module diffraction
pattern: the case of a light source at finite distance
Spiga, D. , Valsecchi, G., Marioni, F., Burwitz, V., Hartner, G.
2017, INAF/OAB technical report 03/2017
Simulations for the 1.49 keV and 6.4 keV beamlines of BEaTriX
N. 2
Spiga, D. , Salmaso, B. , Basso, S.
2023, INAF-OAB Technical Report 03/2023
Simulations of an extended X-ray source imaged by an
ellipsoidal mirror
Spiga, D.
2016, INAF/OAB technical report 13/2016
Slumped glasses for the IXO X-ray telescope: PSF simulations
by application of the Fresnel diffraction
Raimondi, L., Spiga, D. , Civitani, M. , Pagano, G., Basso, S. , Ghigo, M. , Proserpio, L.
2010, INAF/OAB internal report 04/2010
Slumped Glass Optics:
Cleanliness check with deflectometry
On the Integration MAchine
Civitani, M. , Breunig, E.
2016, INAF/OAB internal report 04/2016
Slumped shell test progress review
Ghigo, M.
2006, Doc. n. ELT-TRE-INA-09300-0007
Relazione tecnica prodotta nell' ambito dello sviluppo
della tecnica di Slumping per ELT Design Study FP6, (2006).
Slumping Eagle XG on new Zerodur K20 MK20-20 mould
Salmaso, B. , Brizzolari, C., Civitani, M. , Sanvito, G., Spiga, D.
2014, INAF/OAB internal report 15/2014
Slumping Furnace and Mould specifications
Ghigo, M. , Basso, S.
2006, ELT-SPE-INA-09300-0001
Slumping Furnace and Mould specifications.
Ghigo, M.
2006, Doc. n. ELT-SPE-INA-09300-0001
prodotto nell' ambito dello sviluppo della tecnica di
Slumping per ELT Design Study FP6, (2006).
Specifications for the enhanced X-ray Timing Polarimeter (eXTP)
Spiga, D. , Tagliaferri, G. , Pareschi, G. , Feroci, M., Santangelo, A.
2017, INAF/OAB technical report 01/2017
Specifications of the parabolic X-ray mirror for the XRD
laboratory at ELETTRA
Spiga, D. , Rebuffi, L.
2016, INAF/OAB internal report 07/2016
Spettroscopia dispersiva in raggi X finalizzata allo
sviluppo e calibrazione di ottiche, rivelatori, filtri
per impiego di missioni spaziali
Pelliciari, C., Pareschi, G.
2006, Rapporto di attivit? nell'ambito della collaborazione tra
istituti INAF/OAPa e OABrera relativamente al periodo di
permanenza del Dr. Carlo Pelliciari presso l' Osservatorio
Astronomico di Brera, Maggio 2006
SPO diffraction simulation software for the ESA-SImPOSIUM
project: the user manual
Spiga, D.
2020, INAF/OAB internal report 04/2020
Sticking of Eagle glass on Zerodur K20-20 mould: failure analysis
Salmaso, B. , Brizzolari, C.
2014, INAF/OAB internal report 06/2014
Stray light contamination assessment for XIPE
Spiga, D. , Tagliaferri, G. , Soffitta, P., Costa, E., Muleri, F.
2016, INAF/OAB internal report 05/2016 - ESA class. XIPE-OAB-TN-0004
Surface roughness and bulk characterization of SiC and
Aluminium samples with PECVD-SiC cladding
Canestrari, R., Spiga, D. , Pareschi, G. , Ghigo, M. , Arumainathan, S., Destefanis, G., Fabbri, P., Ferrari, C., Guaita, C., Nicolosi, P., Salviati, G., et al.
2007, Internal report INAF/OAB 03/07
SWORDS - SoftWare fOR Diffraction Simulation of silicon pore
optics: the user manual
Spiga, Daniele
2021, INAF/OAB internal report 06/2021
System Requirements Specifications
Fiorini, M., Gianotti, F., Moretti, A. , La Palombara, N., Tiengo, A., Trifoglio, M., Uslenghi, M., Zambra, A., Mereghetti, S.
2008, XIAO Phase A Documents, XIAO-XST-SR-001 (Sept.2008)
Technical Demonstrator Model no.2 for NHXM: metrological
analysis performed at OAB
Spiga, D. , Raimondi, L., Salmaso, B. , Basso, S. , Marioni, F., Orlandi, A.
2011, INAF/OAB internal report 07/2011
Test del precollimatore eseguito con anellino
elettroformato e incollato nell’intersection plane
Basso, S. , Mattaini, E.
2009, IR 03/2009
Test plan of the BEaTriX paraboloidal mirror at PANTER
Spiga, D. , Salmaso, B. , Basso, S. , Sironi, G. , Ghigo, M. , Vecchi, G. , Cotroneo, V. , Pareschi, G. , Tagliaferri, G.
2021, INAF/OAB internal report 02/2021
Test results of the BEaTriX paraboloidal mirror at PANTER
Spiga, D. , Salmaso, B. , Basso, S. , Sironi, G. , Ghigo, M. , Vecchi, G. , Cotroneo, V. , Pareschi, G. , Tagliaferri, G. , Burwitz, V., Hartner, G., et al.
Spiga, D. , Salmaso, B. , Basso, S. , Sironi, G. , Ghigo, M. , Vecchi, G. , Cotroneo, V. , Pareschi, G. , Tagliaferri, G. , Burwitz, V., Hartner, G., Rukdee, S., Mueller, T., Schmidt, T., Langmeier, A., Budau, B.
2021, INAF/OAB technical report 03/2021
The BEaTriX collimating mirror: metrology with LTP at ELETTRA
Spiga, D. , Raimondi, L., Gerusina, S., Simoncig, A., Salmaso, B. , Basso, S. , Ghigo, M. , Sironi, G. , Vecchi, G.
2020, INAF/OAB internal report 2020/01
The BEaTriX parabolic mirror: manufacturing tolerances and expected results in
UV and X-ray illumination
Salmaso, B. , Spiga, D.
2018, INAF/OAB technical report 05/2018
The CCD camera of the BEaTriX facility: dark frames
characterization and photon counting
Sisana, D. , Tentori, N. , Salmaso, B. , Spiga, D. , Basso, S. , Uslenghi, M.
2023, INAF/OAB internal report 02/2023
The magnetic field generated by uniformly-magnetized,
segmented rings
Spiga, Daniele
2022, INAF/OAB technical report 02/2022
"Thickness variation measurements performed on
Borofloat 33 sheets"
Holland, S. T., Barthelmy, S. D., Chester, M. M., Gehrels, N., Kennea, J. A., Marshall, F. E., McLean, K. M., Pagani, C., Page, K. L., Palmer, D. M., Romano, P. , et al.
2006, GRB Coordinates Network, Circular Service, 5273, 1 (2006)
Vineyard Management from Space - From Bacchus to Eneide
XOU_BB Prototype: manufacturing steps and analysis of expected alignment
performances
Civitani, M. , Basso, S. , Proserpio, L. , Ghigo, M.
2013, INAF/OAB internal report 03/2013
X-ray and topographic characterization of a W/Si graded
multilayer coated mirror shell (n.333) at PANTER facility
(april 2005)
Spiga, D. , Burkert, W., Hartner, G., Budau, B., Vernani, D., Canestrari, R., Pareschi, G. , Citterio, O. , Basso, S. , Mazzoleni, F., Valtolina, R., et al.
2005, INAF/OAB Internal Report 08/05
X-ray mirror module design from exact FOV requirement:
extension to the case of on-axis obstructed mirrors
Spiga, D.
2016, INAF/OAB internal report 12/2016
X-ray optic 346 manufactured at MSFC and Harvard-CfA:
results of tests at PANTER facility and surface characterization
Spiga, D. , Canestrari, R., Pareschi, G. , Basso, S. , Bruni, R., Burkert, W., Budau, B., Freyberg, M., Gorenstein, P., Hartner, G., Mazzoleni, F., et al.
2007, INAF/OAB internal report 01/07
X-ray optics with slumped glasses: High-resolution metrology with CUP of
AF32 slumped glasses
Civitani, M.M. , Salmaso, B. , Proserpio, L. , Pareschi, G.
2015, INAF/OAB internal report 12/2015
X-ray optics with slumped glass: optical design and
integration item requirements definition for Proof of
concept #4 (POC#4)
Civitani, M. , Spiga, D.
2013, INAF/OAB internal report 13/2013
X-ray optics with slumped glass: preliminary optical design for an Athena like
mission
Civitani, MM. , Basso, S. , Pareschi, G.
2015, INAF/OAB internal report 08/2015
X-ray Polarimeter for HXMT
Costa, E., Muleri, F., Soffitta, P., Bellazzini, R., Brez, A., Spandre, G., Cotroneo, V. , Pareschi, G.
2006, Contribution to the Chinese-Italian meeting in Bologna,
2-3 October 2006,
HXMT_report_061002
X-ray scattering measurements of Fused Silica samples
after Ion Beam Figuring
Salmaso, B. , Spiga, D.
2017, INAF/OAB technical report 06/2017
X-ray simulations of the ASPHEA MM#1 mirror module
assembly tested at PANTER
Spiga, D. , Valsecchi, G., Marioni, F., Pareschi, G. , Tagliaferri, G.
2018, INAF/OAB technical report 02/2018
X-ray tests at PANTER on Nickel-Cobalt EM#3 (phase A)
SIMBOL-X optic prototype
Spiga, D. , Freyberg, M., Burkert, W., Hartner, G., Budau, B., Mattarello, V., Garoli, D., Boscolo Marchi, E., Basso, S. , Valtolina, R., Mattaini, E., et al.
Spiga, D. , Freyberg, M., Burkert, W., Hartner, G., Budau, B., Mattarello, V., Garoli, D., Boscolo Marchi, E., Basso, S. , Valtolina, R., Mattaini, E., Canestrari, R., Garegnani, D., Tagliaferri, G. , Pareschi, G. , Moretti, A.
2009, INAF/OAB internal report 01/2009
X-ray tests at PANTER on the EM#2 SIMBOL-X optic (phase A)
Spiga, D. , Pareschi, G. , Tagliaferri, G.
2008, INAF/OAB internal report 09/2008
X-ray tests at PANTER on the optic 291+295 prototype (EM#1)
for the phase A of SIMBOL-X
Spiga, D. , Dell'Orto, E., Freyberg, M., Hartner, G., Budau, B., Pareschi, G. , Tagliaferri, G.
2008, INAF/OAB internal report 07/2008
X-ray tests at PANTER on the TDM1 optic prototype for the
New Hard X-ray Mission
Spiga, D. , Raimondi, L., Valsecchi, G., Orlandi, A., Borghi, G., Salmaso, G., Marchi, E. B., Binda, R., Basso, S. , Marioni, F., Ferretti, L., et al.
Spiga, D. , Raimondi, L., Valsecchi, G., Orlandi, A., Borghi, G., Salmaso, G., Marchi, E. B., Binda, R., Basso, S. , Marioni, F., Ferretti, L., Freyberg, M., Burkert, W., Hartner, G., Budau, B., Sironi, G. , Missaglia, N., Tagliaferri, G. , Pareschi, G.
2010, INAF/OAB internal report 05/2010
X-ray tests at PANTER on the TDM2 optic prototype for the
New Hard X-ray Mission
Spiga, D. , Raimondi, L., Salmaso, B. , Valsecchi, G., Orlandi, A., Borghi, G., Binda, R., Basso, S. , Borrelli, D., Marioni, F., Ferretti, L., et al.
Spiga, D. , Raimondi, L., Salmaso, B. , Valsecchi, G., Orlandi, A., Borghi, G., Binda, R., Basso, S. , Borrelli, D., Marioni, F., Ferretti, L., Freyberg, M., Burkert, W., Hartner, G., Budau, B., Tagliaferri, G. , Pareschi, G.
2010, INAF/OAB internal report 06/2010
X-ray tests at PANTER on the TDM3 optic prototype for the
New Hard X-ray Mission
Raimondi, L., Salmaso, B. , Spiga, D. , Valsecchi, G., Orlandi, A., Borghi, G., Rossi, M., Marioni, F., Basso, S. , Burwitz, V., Freyberg, M., et al.
Per gli studenti e ospiti
Ricerca in ADS
Performance predictions for the BEaTriX expanded beam
